🇵🇰 Pakistan
SMART LOCK BUYING GUIDE

Smart Lock Camera Guide: What to Know Before Buying in Pakistan

Choosing a smart lock camera in Pakistan means checking more than the camera. Compare offline access, indoor viewing, battery backup, mortise fit and door compatibility before choosing the right system for your home.
In this guide
Quick answer

Will a smart lock fit your door?

Smart lock compatibility depends on the door material, door thickness, mortise size, backset, handle direction, frame clearance and available mounting space.

A smart lock may fit one wooden or metal door but not another, even when both doors look similar. Exact measurements should therefore be checked before choosing a model.

Buyers often start by comparing fingerprint access, cameras and mobile apps. For compatibility, however, the first question should be whether the physical lock body can work with the actual door.

This guide explains smart lock door compatibility for Pakistani homes and shows the measurements that should be checked before ordering.

Door type 01

Can You Install a Smart Lock on a Wooden Door?

A smart lock for a wooden door can be suitable when the door has enough thickness, mounting space and structural clearance for the selected lock and mortise.

The fact that a door is wooden does not automatically mean every smart lock will fit. Decorative panels, existing holes and the current mechanical lock can all affect compatibility.

Door thickness Measure the actual door edge instead of estimating it.
Existing mortise Check the current lock body and existing cut-out.
Panel clearance Raised trims can reduce the available flat mounting space.
Door edge condition Check usable material around the mortise and fixing points.
Demo image showing smart lock compatibility with a wooden door
Demo: smart lock installed on a wooden main door with the door edge and fitting area visible.
Important Do not choose a lock only because another wooden door uses the same model. Two wooden doors can have different thicknesses, mortises, frames and handle positions.
Door type 02

What About a Smart Lock for a Metal Door?

A smart lock for a metal door may also be possible, but metal-door construction varies significantly. Internal reinforcement, existing cut-outs and the available space around the lock body should be checked first.

Wooden doors

Compatibility depends on door thickness, mortise dimensions, mounting space, frame position and existing holes.

Metal doors

Internal reinforcement, fixed cut-outs and existing hardware can make modification more restrictive.

Demo comparison of wooden and metal door compatibility for smart locks
Demo: side-by-side comparison showing different wooden and metal door construction.

For either material, compare the actual door measurements with the requirements of the exact smart-lock model before purchase.

Measurement 01

Smart Lock Door Thickness: Why It Matters

Smart lock door thickness affects how the front panel, rear panel, spindle, fixing screws and mortise align through the door.

Measure the actual structural thickness of the door at the lock position rather than guessing from appearance.

01

Open the door

Measure from the inner face to the outer face of the door.

02

Use millimetres

Record an exact measurement instead of describing the door as thin or thick.

03

Measure near the lock

Decorative doors may not have equal thickness across every section.

Demo showing how to measure door thickness before buying a smart lock
Demo: measuring the door thickness at the intended smart-lock position.
Measurement 02

Check the Smart Lock Mortise and Lock Body

The smart lock mortise is the locking mechanism fitted inside the edge of the door. Its size, position and relationship with the frame are central to compatibility.

Replacing an existing lock does not always mean the new smart lock can use the same opening. The mortise cut-out can be smaller, larger or positioned differently.

Check

Mortise size

Measure or photograph the existing lock body and door-edge opening.

Check

Faceplate position

Check where the mortise faceplate sits relative to the door edge.

Check

Bolt alignment

The latch and locking bolts need to align with the door frame.

Demo showing smart lock mortise lock body and backset on a door
Demo: close-up view of the mortise, lock body, backset and door-edge hardware.

The front panel is only part of the lock

A model can appear to fit from the outside while its internal lock body does not match the available mortise space. Both the visible panel and internal hardware should be checked.

Measurement 03

What Is Backset and Why Should You Check It?

Backset describes the horizontal relationship between the edge of the door and the central operating position of the lock hardware.

Backset affects where the handle, spindle and internal mechanism sit on the door. An unsuitable position can create fitting problems even if the door itself is thick enough.

Buyer tip If you are unsure how to identify the backset, clear photos of the door edge and existing lock, together with measurements, are more useful than guessing.
Door movement

Check Handle Direction and Left or Right Opening

Handle direction and left/right opening should be confirmed before ordering. The hinge position and whether the door opens inward or outward can affect the lock configuration.

Check What to identify Why it matters
Hinge side Identify which side carries the hinges. Helps establish door handing.
Opening direction Confirm whether the door opens inward or outward. Affects lock configuration.
Handle side Check which direction the existing handle operates. Helps avoid incorrect orientation.
Door edge Take a clear photo with the door open. Shows mortise and bolt arrangement.
Demo guide showing left right inward and outward door opening directions
Demo: visual guide showing hinge side, handle direction and inward or outward opening.
Final physical check

Do Not Forget the Door Frame and Clearance

The door frame must provide enough space for the latch and locking bolts to engage correctly. Smart lock compatibility is not only about the door leaf itself.

Check the gap between the door and frame, strike location, decorative mouldings and nearby surfaces that may interfere with the panel or handle.

Frame clearance Check that the panel and handle have sufficient operating space.
Strike alignment The latch and bolts should align correctly with the frame.
Decorative trim Raised mouldings may interfere with the mounting surface.
Handle movement Make sure the handle does not contact the frame or nearby hardware.
Main entrance

Choosing a Smart Lock for a Main Door

When choosing a smart lock for a main door, compatibility should come before advanced features. Start with the physical door, then compare fingerprint, camera or biometric functions after identifying models that can realistically fit.

This prevents choosing a model based on features first and discovering later that the existing mortise, thickness or frame requires a different solution.

Pre-purchase checklist

What Should You Check Before Ordering?

If you are asking about smart lock door compatibility, provide clear information about the actual door. Useful photos and measurements can prevent incorrect assumptions.

Full door photo Show the complete door and current lock.
Door edge photo Show the current mortise and faceplate.
Door thickness Measure thickness at the lock position.
Existing lock dimensions Provide useful measurements of the lock body and cut-out.
Hinge and opening direction Show which side carries the hinges and how the door opens.
Frame and strike area Show where the latch and locking bolts close.
Compatibility should be confirmed for the exact model Do not assume every ZEKI model fits every wooden or metal door. Dimensions, mortise requirements and available mounting space should be checked before the final product choice.
Explore ZEKI

Compare ZEKI Smart Locks for Your Door

Review the ZEKI range after checking your door material, thickness, mortise, opening direction and available fitting space. Compatibility should be confirmed for the exact door before ordering.

Common questions

Smart Lock Door Compatibility FAQs

Can a smart lock be installed on a wooden door?

Many smart locks can work with suitable wooden doors, but compatibility depends on door thickness, mortise size, mounting space, frame clearance and the requirements of the exact lock model.

Can a smart lock be used on a metal door?

Some smart locks may be suitable for metal doors, but the existing cut-out, internal reinforcement, mortise space and door construction should be checked first.

Does door thickness matter for a smart lock?

Yes. Door thickness affects how the front and rear panels, spindle, fixing hardware and mortise align through the door.

What is a smart lock mortise?

The mortise is the locking mechanism fitted inside the edge of the door. Its dimensions and bolt arrangement must match the selected lock and door frame.

What is backset on a door lock?

Backset describes the horizontal position of the lock mechanism relative to the edge of the door and affects the location of the handle, spindle and internal lock body.

Does left or right door opening matter?

Yes. The hinge side, handle direction and whether the door opens inward or outward should be identified before selecting or configuring a smart lock.

What information should I provide before ordering?

Provide clear photos of the full door, door edge, existing lock and frame, along with door thickness, mortise details and opening direction.